Beyond Biological Chelation: Coordination of f-Block Elements by Polyhydroxamate Ligands

The promise of polyhydroxamic acid ligands for the selective chelation of the f-block elements is becoming increasingly more apparent. The initial studies of polyhydroxamic acid siderophores showed the formation of highly stable complexes with Pu^IV, but a higher preference for Fe^III hindered effective applications. The development of synthetic routes toward highly pure and customizable ligands containing multiple hydroxamic acids allowed for the growth of new classes of compounds. Although the first round of these ligands focused on the incorporation of siderophore-like frameworks, the new synthetic strategies led to small molecules of various frameworks and even resins for applications in the field of f-block element separations and biological desorption. Unfortunately, a lack of consistent stability-constant data makes direct comparisons across this body of work difficult. More studies into the stability constants and separations of the f-block elements in a variety of pH ranges is necessary to truly realize the potential for polyhydroxamic acid ligands.     

Colloidally Stable CdS Quantum Dots in Water with Electrostatically Stabilized Weak-Binding,Sulfur-Free Ligands

Colloidal quantum dot (QD) photocatalysts have the electrochemical and optical properties to be highly effective for a range of redox reactions. QDs are proven photo-redox catalysts for a variety of reactions in organic solvents but are less prominent for aqueous reactions. Aqueous QD photocatalysts require hydrophilic ligand shells that provide long-term colloidal stability but are not so tight-binding as to prevent catalytic substrates from accessing the QD surface. Common thiolate ligands, which also poison many co-catalysts and undergo photo-oxidative desorption, are therefore often not an option. This paper describes a framework for the design of water-solubilizing ligands that are in dynamic exchange on and off the QD surface, but still provide long-term colloidal stability to CdS QDs. The binding affinity and inter-ligand electrostatic interactions of a bifunctional ligand, aminoethyl phosphonic acid (AEP), are tuned with the pH of the dispersion. The key to colloidal stability is electrostatic stabilization of the monolayer. This work demonstrates a means of mimicking the stabilizing power of a thiolate-bound ligand with a zwitterionic tail group, but without the thiolate binding group.     

一类正交空间填充设计的构造

空间填充设计在计算机试验中应用十分广泛,当拟合回归模型时,正交的空间填充设计保证了因子效应估计的独立性.基于广义正交设计,文章给出了构造二阶正交拉丁超立方体设计和列正交设计的方法,新构造的设计不仅满足任意两列之间相互正交,还能保证每一列与任一列元素平方组成的列以及任两列元素相乘组成的列都正交.当某些正交的空间填充设计不存在时,具有较小相关系数的近似正交设计可作为替代设计使用.设计构造的灵活性为计算机试验在实践中的广泛应用提供了必要的支持.     

高分辨率微型星载相机光学系统的设计及应用

为了克服太空环境的复杂性，满足航天工程的空间使用要求，研制一款2 500万像素宽光谱共焦成像的微型星载相机光学系统。该系统适应卫星发射和在轨道运行的恶劣环境，具有抗冲击震动、耐太空高温差强辐射，体积小，质量轻等优点。设计的系统可在450 nm～800 nm的谱段内清晰成像，焦距181 mm，入瞳口径45 mm，视场角10.4°，边缘相对照度0.81，轴上点MTF:0.57@55 lp/mm，0.33@110 lp/mm，畸变1.2%，镜头质量622 g，外形尺寸Φ58.3 mm×117 mm，抗辐照性能≥5 krad。通过温度适应性的模拟和优化，用户进行?30 ℃～+70 ℃光学镜头热真空试验，可正常工作。该系统已成功应用于天宫二号伴飞卫星相机中，获得的图像清晰稳定，为空间遥感实验观测发挥了重要的作用。     

静止轨道高光谱海洋水色仪光学系统设计

设计了由超大口径前置望远系统和超大视场光谱仪组成的超大口径高光谱海洋水色仪.前置望远系统采用同轴三反光学系统结构,口径为4 m,视场为0.64°,焦距为21.6 m,波段范围为400~1 000nm.超大视场光谱仪采用改进的Offner结构,视场为240mm,光谱分辨率为10nm.探测器像元尺寸为15μm×15μm,4片探测器交错拼接实现400km幅宽.超大视场光谱仪在400~1 000nm的宽波段内,点列图半径的均方根值均小于3.9μm,静止轨道高光谱海洋水色仪全系统不同波长的MTF在33.3lp/mm处大于0.52,各项指标均满足应用要求.     

EicC对撞光学设计

EicC是中国科学院近代物理研究所计划建造的中国电子-离子对撞机装置,该对撞机质心能位于20 GeV附近,是研究海夸克的最佳能量窗口,同时还可研究胶子和价夸克。EicC对撞粒子为高极化率质子和电子束团,质子环pRing采用八字环设计方案,可以更好地保持极化质子束团极化率,电子环eRing采用跑道形环设计方案,可以更好地利用隧道空间。该装置电子束流能量中心值为3.5 GeV,电子束RMS发射度为水平方向60 nm·rad,垂直方向60 nm·rad,对撞点b函数为水平方向0.4 m,垂直方向0.12 m;质子束流能量中心值20 GeV,质子束RMS发射度为水平方向300 nm·rad,垂直方向180 nm·rad,对撞点b函数为水平方向0.08 m,垂直方向0.04 m,设计亮度2×1033 cm–2s–1。EicC采用双对撞区非对称光学设计,通过对EicC不同色品补偿方案的研究,最终确定了弧区加短直线节共同补偿的色品补偿方案;通过研究对撞点处b函数以及对撞点间相移对动力学孔径的影响,最终得到pRing动力学孔径大于8 s(s为束团RMS尺寸)、eRing动力学孔径大于20 s,满足大于束团尺寸6 s的要求。     

Separation between second price auctions with personalized reserves and the revenue optimal auction

When buyer valuations are drawn IID from a known regular distribution, a second price auction with a symmetric reserve price is the revenue-optimal single-item auction. When this distribution is irregular, we provide the first separation result showing that a second price auction with reserves earns at most 0.778 times the revenue of Myerson’s optimal auction, even when the reserves can be asymmetric. Since the lower bound is 0.745 for i.i.d. buyers, our result is nearly tight.     

A design of experiments concept for the minimization of nonspecific peptide adsorption in the mass spectrometric determination of substance P and related hemokinin‐1

Substance P and hemokinin‐1 were predominantly examined by immunoassays with their limitation to differentiate appropriately between both peptides. The use of liquid chromatography coupled with tandem mass spectrometry is a promising, highly selective alternative. Adsorption processes have been identified in preliminary experiments to play a crucial role in the loss of mass spectrometry intensity of both peptides. Therefore, a design of experiments concept was created to minimize nonspecific peptide adsorption. For this purpose, the most critical influencing parameters—(1) the composition of the injection solvent as well as (2) the most suitable container material—were systematically and concordantly investigated. The addition of modifiers, such as formic acid, dimethyl sulfoxide, and organic solvents, to the injection solvent led to a substantial gain of intensity of substance P and hemokinin‐1 compared to the start gradient as an injection solvent. Furthermore, the systematic investigation underlined the high impact of the container material, demonstrating polypropylene as the most favorable material. A conjoint injection solvent optimum was found to determine both peptides simultaneously by the conduction of a sweet‐spot analysis. The experimental design substantially reduced nonspecific peptide adsorption and enabled the simultaneous and selective determination of endogenous substance P and hemokinin‐1 plasma levels.     

科研成果向教学实验的转化设计与实践成效*

围绕学校高水平应用型人才培养目标,依托省级重点实验室与省级化学化工大学生创新训练中心等科研教学平台,将“零排放型化学镀镍及其废液资源化为掺杂型LiFePO₄/C复合材料”的科研成果进行拆解和提炼,设计为分阶段、多层次的10个教学实验项目,并予以实践。结果表明,该科教融合模式营造出良好的科研氛围,有利于学生科研素养与创新意识的培养、实践能力与创新能力的提升。